Quick Guide Installation Videos

The last thing you want to do when cutting vinyl is use a standard fine-toothed saw blade designed for wood. The time it takes to install siding depends on the size of your home, the type of siding being installed, and weather conditions. On average, a typical siding project can take anywhere from a few days to two weeks.

• Flashing behind butt joints is an effective, low maintenance way to comply with building code and help protect against water intrusion.
• While vinyl siding can be recycled, it cannot be burned (due to toxic dioxin gases that would be released).
• All the time I see new construction where the step flashing going up the long rake walls on big box houses is not visible at all.
• Thank you.Not aliens.Something on my scanner.Not native to KS.
• Finally, measure the distance from the first row to the deck top and cut the siding to fit over the deck.

How to Install Trespa Pura NFC® Sidings Vertically

With its long-lasting performance and minimal upkeep requirements, vinyl siding offers both practicality and aesthetic versatility for homeowners. There are a few things Roofing contractors that you must navigate around when installing your siding. Decks, for example, would require you to install two starter strips. One on the bottom of the house, and again one just above where your deck boards are installed. You can start by gently prying up the top piece of vinyl where it overlaps the one below it. This will unhook it from the channel, which you can slide off and expose the nails underneath.

What Happens on Siding Installation Day

The weathering and UV enhancement that has given these products their patina and character has also toughened up the wood and removed the softest, most rot prone fiber. Site applied sealers can provide additional protection to this material but is not required–and may affect the overall look of the product. Our shiplap profile material can be installed either vertically or horizontally.

Step 7: Install Square Corner J-Channel

To ensure proper installation, make sure that nails are long enough to penetrate 1 1/4” (32mm) into the framing behind the foam. Moreover, consulting your local building code for the requirements relevant to your geographic area, including the use of stainless steel fasteners, is important. Vinyl siding is relatively easy to install, but it does require skill. It’s best to hire a professional who has the tools and experience required to execute the project effectively. If you’re hoping to take the DIY route, you’ll need your siding panels, J channels, nails, and corner pieces. Before you start cutting panels or climbing ladders, make sure you’re fully stocked with the tools and materials you’ll need for a successful vinyl siding installation.

Siding (construction)

Backed by our True Lifetime Siding Warranty, you can have peace of mind knowing that your home is shielded by top-quality custom siding that combines durability and energy efficiency. Invest in the long-term protection and insulation of your home with our home siding services. Trespa Pura NFC® is a great solution for many siding projects and gives you maximum design freedom and a long lasting, beautiful finish. This video shows the steps to install Trespa Pura sidings vertically. Do not caulk areas that will prevent moisture from escaping the Wall cavity (e.g. under windows and around flashing).

It must adjust to the natural conditions where it will reside. Whether you are a DIY homeowner or a contractor looking to boost your skills, we’ll walk you through the basics of vinyl installation to get it done right the first time. You might wonder how studs could possibly allow so much energy loss in a home. One important point that most homeowners don’t know is that wood studs take over about 25% of a wall’s surface.

Vinyl Siding Repair Kit

Before installing siding, a weather-resistant barrier like house wrap or felt paper is applied to protect against moisture. In some cases, foam board insulation is added for extra energy efficiency and a smoother surface. Proper installation of these layers helps prevent water infiltration and improves insulation. Mastering advanced techniques for complex angles and corners will elevate your vinyl siding installation.

Step 7: Finishing touches are completed.

However, some local building codes may require different size flashing. Joint flashing must be durable, waterproof material that does not react with cement products. Examples of suitable material include finished coil stock and code-compliant water-resistive barriers such as Hardie® Wrap weather barrier. For horizontal applications, start with the bottom course and work up with the channels pointing upwards. Allow a 1/8 inch expansion gap between pieces if the siding is air or kiln-dried. For siding up to 6 inches wide, use one nail one inch up from the lap.

Step 3

Say goodbye to contractors who promise unrealistic timelines, leave your home a mess, and provide vague invoices. Here at Vermont Construction, we stick to our word, give us a try and see why we are highly recommended across the state of Vermont and beyond. Look for contractors with strong references, proper licensing, and insurance.

Vinyl Siding Installation Step #7: Siding the Walls

Though this does add a slight delay to the project, it is important that you are happy with the final product. Once all of the siding is complete, it is time for the paint crew to come in. Flashing is placed underneath windows and around doorways to protect those areas.

• These friendly instructions are just a guide and are superseded by the building codes in your area.
• As siding boards will expand and contract with temperature, it is essential to know how much of a gap to leave between the boards during installation.
• If you opt for this method, nail sparingly—about one nail every six to eight feet.
• From prepping for water management to ensuring proper gaps, every step contributes to a successful outcome that enhances the aesthetics of your home or business and stands the test of time.
• When the wood arrives it will begin to change sizes to adjust to its new climate.
• HGTV has an excellent guide on safely removing vinyl siding, which covers the process in more detail than we do here.
• Our Siding & Shiplap and Shou Sugi Ban products all come standard with two coats of sealer applied to the face and one to the back.

Wooden sheet siding

When evaluating a home, whether for purchase or renovation, taking the time to inspect the siding’s installation can save you from costly repairs down the road. Stone and masonry veneer is sometimes considered siding, are varied and can accommodate a variety of styles—from formal to rustic. Though masonry can be painted or tinted to match many color palettes, it is most suited to neutral earth tones, and coatings such as roughcast and pebbeldash. Masonry has excellent durability (over 100 years), and minimal maintenance is required.

Vinyl Shake Siding

Expect to pay $300–$1,200 per square for standard vinyl siding, including materials and basic installation. This metric is useful for more accurately estimating the overall cost of a sizable project. All the time I see new construction where the step flashing going up the long rake walls on big box houses is not visible at all. The sider has nailed his J channel after laying it flat on the roofer’s shingles.

Why Vermont Construction Company?

If you’re using foam board or insulation wrap, install it panel-by-panel to ensure it’s compressed slightly and doesn’t bulge the siding outward. Vinyl siding isn’t just a matter of hammer and nails—there are specific installation techniques you’ll need to follow to avoid warping, cracking, and water damage down the road. From choosing the right materials to understanding maintenance, our FAQ section covers everything you need to know about siding installation. We discuss the benefits and drawbacks of metal siding in terms of cost, maintenance, curb appeal, durability and more.

Allowing for Expansion and Contraction

Compared to other siding materials, wood provides a classic charm, superior insulation, and a unique character that enhances the aesthetic appeal of any home. With proper maintenance, wood siding can withstand the elements for decades, adding value to your property. Picking the right siding for your home goes beyond just looks – it’s about keeping your house protected.

How do I choose the right siding material for my home?

There are quite a few steps to cover for proper vinyl siding installation, but it can be less depending on whether or not you’re reusing your trim pieces. Put the next siding piece up on the wall and into the j-channel if able. You will use your steel snips for this cut since they make the most precise cuts in small areas. Check out the video below for more instructions on installing steel siding around light blocks, faucets, and lights.

If environmental impact is important to you, we recommend looking for brands that prioritize sustainability. Maintaining original materials or using period-appropriate alternatives may be more valuable in such areas, so consider your neighborhood before installing vinyl. Keep pets and children safely indoors, or schedule play dates so they won’t be disturbed by the commotion. You might want to work outside the house that day too—as siding replacement can get loud.

From there, our vinyl siding installation contractors fit your home with siding that’s both attractive and enduring. We don’t just install siding; we ensure your home’s exterior is flawlessly presented and protected for years to come. A vinyl siding starter strip goes along the bottom of the exterior wall, where you want the vinyl siding to start.

Vinyl Siding Installation Step #20: Meet the Soffit

ASCEND® Composite Cladding offers a first-of-its-kind solution that brings together beauty, performance and efficient installation for one of the best overall values on the market. We go over the most common gauges and when it’s best to use each. Here’s an easy formula to calculate the amount of screws that are needed on a metal roof or wall. Head and jamb trim will be installed around all 4 sides of the doorway. Just make sure to use a slow speed setting, and don’t apply too much pressure to the vinyl panel.

OFF* Siding

This will leave you ready to install siding on the lower portion of the first wall. Measure for the first piece and trim it to length, making sure that it’s 1/2-inch shorter than the distance between vertical trimpieces, as measured from the inside surfaces of the channels. If raising or lowering the starter edge an inch or two will make the top pieces fall where you want them, by all means, do so. If you have to cut the top row of siding, then use J-channel at the top instead of utility trim.